Seventeenth Day


Today, Peter and I continued to work on our glass attachment parts. In the morning, we finished the part in SolidWorks, and then went to the Construct. Apparently, the mill in the Construct can't make a part out of our material and with our size, so we were then sent to the Machine Shop in the engineering building. At the Machine Shop, we were told to bring prints of our drawings, so Peter and I had to figure out how to print without having to pay (at the Library, it cost 16 cents to print our drawings, and neither of us had money on our ID cards). We eventually printed our drawings, and then went back to the Machine Shop to submit our request for our part to be made with a mill. Our part should be done by Tuesday.

After lunch, Peter and I worked on our outline and hung out in the Reading Room for a little bit. We ended early, around 3:30pm. Next week, we will hopefully be able to begin collecting data. Joe brought up a good point that we are going to have to find cancerous skin cells to collect data from, so I will ask Dmitry about that during the week.

Comments

Post a Comment

Popular posts from this blog

Second Day

Day 2 of interning also went well! At 8:45 we had our daily briefing with Joe and were given a schedule of the internship. After that, my group and I went down to our office space where we set up shop; I also reviewed some of the material we went over yesterday. At 10am we met up with Dmitry and went over our "homework" from the night before and reviewed information about bell curves, mean, and variance, and learned some new information about reflection coefficients and the Fresnel equation. After that, Dmitry printed out some information for us about polarization that we read through for about an hour and a half. Then we took a lunch break and met up around 1pm. We went to the main lab where we took a look at the enclosed room that will be used for Tristan's research, which isn't fully constructed yet. It's necessary that the room is enclosed and the air is filtered because dust and dirt will create noise that will affect measurements and data. Dmitry then sho
Read more

Twenty-seventh Day

On Friday, Peter and I started to look for error and the Signal to Noise Ratio (SNR) in our pictures. We used MATLAB to look at which pictures had the highest SNR and lowest error. We decided that pictures taken with an exposure time of 8500 microseconds and at lower angles had the best SNR. In the afternoon, we worked on our PowerPoint and did a mock presentation in front of Dmitry. We have a lot of things to change in our presentation organization-wise, but nothing too bad. It was beneficial to verbalize our info, and get constructive criticism. One thing we didn't emphasize enough in our original presentation was what Peter and I actually did, including designing the track and the glass holder. In our final presentation, we are going to explain more of what we actually did, so it will be more fun for us to present and more entertaining for the audience.
Read more

Fifth Day

Today, during the morning meeting, all of the interns watched a video description of imaging science. After the morning meeting, I caught Peter up on the information I found about birefringence and then showed him how to use the camera. We then started to research how to measure birefringence and then went up to the tech talk on the second floor. The talk was about how imaging science is used in the biomedical engineering field to create new, less invasive technology. Less invasive technology means that doctors need more external viewing ability through technology such as digital models or physical models. I really enjoyed the talk and was able to learn a lot about biomedical engineering. In the afternoon, Peter and I took a quick break and then continued research about the birefringence   of skin cells. We then looked into some reports that Dmitry suggested about polarimetric imaging of cervix cells that used processes that we might be able to apply in our own research. Tomorrow, w
Read more