Twenty-sixth Day


Today, Peter and I tested out different angles of incidence and changed exposure time on our camera. We are still looking for the best angle of incidence, but we think it's between 23.5 and 78.5 degrees. We are continually processing images with our code in MATLAB. Hopefully tomorrow we will finish our presentation, and can go over it with Dmitry.

In the afternoon, we helped Dmitry take down his telescope on the roof of the Carlson building that he's going to ship to Oregon for the solar eclipse. I had to leave early for a dentist appointment.

Comments

Post a Comment

Popular posts from this blog

Second Day

Day 2 of interning also went well! At 8:45 we had our daily briefing with Joe and were given a schedule of the internship. After that, my group and I went down to our office space where we set up shop; I also reviewed some of the material we went over yesterday. At 10am we met up with Dmitry and went over our "homework" from the night before and reviewed information about bell curves, mean, and variance, and learned some new information about reflection coefficients and the Fresnel equation. After that, Dmitry printed out some information for us about polarization that we read through for about an hour and a half. Then we took a lunch break and met up around 1pm. We went to the main lab where we took a look at the enclosed room that will be used for Tristan's research, which isn't fully constructed yet. It's necessary that the room is enclosed and the air is filtered because dust and dirt will create noise that will affect measurements and data. Dmitry then sho
Read more

Twenty-seventh Day

On Friday, Peter and I started to look for error and the Signal to Noise Ratio (SNR) in our pictures. We used MATLAB to look at which pictures had the highest SNR and lowest error. We decided that pictures taken with an exposure time of 8500 microseconds and at lower angles had the best SNR. In the afternoon, we worked on our PowerPoint and did a mock presentation in front of Dmitry. We have a lot of things to change in our presentation organization-wise, but nothing too bad. It was beneficial to verbalize our info, and get constructive criticism. One thing we didn't emphasize enough in our original presentation was what Peter and I actually did, including designing the track and the glass holder. In our final presentation, we are going to explain more of what we actually did, so it will be more fun for us to present and more entertaining for the audience.
Read more

Eleventh Day

Today, Peter came back. In the morning, we worked on testing the camera pixels to see what pixels measure vertical, horizontal, 45 degree, and -45 degree polarized light. We had to use a polarizer, but before we used it, we had to figure out its orientation of by using a wollaston prism, which splits unpolarized light into horizontal and vertical polarized light. Lee helped us figure out how to use the prism and the polarizer, and we found that at 0 degrees, the polarizer created vertically polarized light. We then took pictures using the CCD camera of a white background inside the polarizer at different polarization states (0 degrees (vertically polarized), 45 degrees, 90 degrees (horizontally polarized), and 135 degrees (-45 degrees)), and analyzed which pixels allowed light through. If a pixel shows up white, that means that the pixel measures light at the polarization state of the polarizer. For example, when the polarizer was set for 90 degrees, the pixel that appeared white meas
Read more